KIWI Design Q8-3 VR Gaming Noise-Isolating Earbuds for Oculus Quest 2 – Install and Review

Enjoy our KIWI Design VR Gaming Noise-Isolating Earbuds for Oculus Quest 2 – Install and Review. You can buy these earbuds for $19.99 on Amazon US or £19.99 from Amazon UK.

In this video, we take a look at the Kiwi Design Q8-3 headphones for the Oculus Quest 2. These are a stereo pair of noise-isolating earbuds that have been made for the Oculus Quest 2, with its short left ear cable and 3.5mm attachment cable and a longer 35cm right ear cable that you can place either around your neck, or you can choose to feed it around the front or rear of the headset for an integrated audio look.

These earbuds carry a 10mm neodymium magnet driver, with a frequency of 20Hz to 20KHz and an impedance of 32ohms and a sensitivity of 108±4db. The result is a decent level of base and clear highs in games like Beat Saber and any other musical game on the Quest 2. Explosions are have a drive to them and overall the sound from these earbuds are decent.

Its silicone ear caps come in three sizes. The medium size is pre-fitted and there is a packet containing the large and smaller sizes. With either pair selected or by using a mix of either ear cap, you can get a decent level of noise-isolation. This creates a deeper level of immersion in VR games, but at the sacrifice of not being able to hear anyone or anything around you. So bear that in mind if you share the room space with anyone else whilst you’re gaming.

I found the bass and treble not to be as good as the Elygo earbuds (https://youtu.be/LOzy6rA0f-Q), and the right side cable on the Q8-3 earbuds wasn’t as generous in length as the Elygo earbuds, so you felt more restricted when channeling the cable around a more firmer head-strap, such as the Elite Strap or Halo Strap.

The cable on the Q8-3 is a little on the thin side, which might seem better for routing the cable around the headset, but I found its less rigid structure to make it harder to keep its shape when attached around the head-strap band.

I also found its ear caps to have a decent seal in my ears, but its less cone-like shape prevent them from really getting into my ears. But a I was easily able to create a decent seal in my ears and that helps with drowning out any noise around me.

The left and right colour coded ear pud casing felt a little redundant on the Quest 2 because of the way it attaches to the side of the headset. The bruised silver design can appear a little on the cheap side. White cabling is certainly the way to go, but I think the ear buds themselves could do with being dark, almost black to compliment the Quest 2 white and black combination of colour scheme. It would make them appear more premium.

If you’re looking for in-ear headphones for your Quest 2, you can’t do no wrong with the Q8-3 ear buds from Kiwi design, but competition is rife and there are some alternatives that might be cheaper, offer better cable length, built quality and sound that little bit better. It’s shorter cable, lower cable and sound quality makes me reach for alternatives instead.

You can buy these earbuds for $19.99 on Amazon US or £19.99 from Amazon UK.


TIMESTAMPS:

00:00 Intro
00:14 Brief overview
00:47 Install & Fit
02:34 Cable management
04:20 First-impressions review


You can view this video and many more on our YouTube channel. If you like what you see, please do Like and Subscribe to our channel so you can be alerted when our next video goes live.

Share this article
Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on reddit
Reddit
Share on email
Email
About the writer
Your Comments
Support us

Shop for Tech on Amazon

Support us - Shop with Amazon

By clicking on the buttons above and buying an item from Amazon, you will help support us by giving us affiliate commission. It will not cost you extra, but it will go a long way in keep us doing what we do best here.

Learn how to support us
Follow us on Social Media
Latest Tech Reviews
Related Posts